TRIASSIC TANK: PLATFORM MARGIN AND SLOPE ARCHITECTURE IN SPACE AND TIME, NANPANJIANG BASIN, SOUTH CHINA

MARCELLO MINZONI
Shell International Exploration and Production Inc., 3333 Highway 6 South, Houston, Texas 77082, USA
e-mail: m.minzoni@shell.com

DANIEL J. LEHRMANN
Department of Geoscience, Trinity University, 1 Trinity Place, San Antonio, Texas 78212, USA

JONATHAN PAYNE
Department of Geological & Environmental Sciences, Stanford University, 450 Serra Mall, Bldg 320, Stanford, California 94305, USA

PAUL ENOS
Department of Geology, University of Kansas, 1475 Jayhawk Boulevard, Lawrence, Kansas 66045, USA

MEIYI YU
Department of Resources & Environmental Engineering, Guizhou University, Caijiaguan, Guiyang 550003, Guizhou Province, People’s Republic of China

JIAYONG WEI
Guizhou Bureau of Geology and Mineral Resources, Bagongli, Guiyang, People’s Republic of China

BRIAN KELLEY
Department of Geological & Environmental Sciences, Stanford University, 450 Serra Mall, Bldg 320, Stanford, California 94305, USA

XIAOWEI LI
Department of Resources & Environmental Engineering, Guizhou University, Caijiaguan, Guiyang 550003, Guizhou Province, People’s Republic of China

ELLEN SCHAAL, KATJA MEYER
Department of Geological & Environmental Sciences, Stanford University, 450 Serra Mall, Bldg 320, Stanford, California 94305, USA

PAUL MONTGOMERY
Chevron North Sea Limited, Onshore Europe, Chevron House, Hill of Rubislaw, Aberdeen AB15 6XL, UK

ALEXA GOERS AND TANNERWOOD
Department of Geoscience, Trinity University, 1 Trinity Place, San Antonio, Texas 78212, USA

ABSTRACT: The Nanpanjiang Basin (NPJB) is a large, complex basin within the south China plate bordered by Precambrian uplifts on the northeast, southeast, and west and by a Triassic suture zone to the south. During the Permian and Triassic, the NPJB formed an embayment in the Yangtze Platform (YP) and contained several isolated carbonate platforms (IPs), including the Great Bank of Guizhou (GBG) and the Chongzuo–Pinnguo Platform.

The NPJB presents an exceptional natural laboratory for evaluating controls on carbonate platform margin and slope architecture. Multiple two-dimensional transects through the YP and IPs provide exposure along spatial and temporal gradients in tectonic subsidence rate, siliciclastic input, antecedent topography, and oceanography. Platform development across the end-Permian extinction and evolving seawater chemistry allow assessment of the impact of carbonate factory change from a basin-wide perspective.

The YP and IPs evolved from ramps and low-relief banks with oolite margins and mud-rich slopes early in the Early Triassic to steepening Tubiphytes-reef rimmed platforms with slopes progressively enriched in clast-supported breccias in the Middle Triassic. Despite differences in the slope angle and windward–leeward differences in grain size at the bank margin, the Early Triassic margin-slope systems have very similar characteristics throughout the basin. During the Middle Triassic, the YP and IPs developed extreme lateral variability in margin architecture due to differences in tectonic subsidence and siliciclastic basin fill at the toe-of-slope.

The southwestern sector of the YP and the GBG drowned under pelagic carbonates followed by siliciclastic turbidites in the Late Triassic, Carnian, while the northeastern YP continued shallow-marine deposition until burial by prograding shallow-marine siliciclastics. The southerly IPs have backstepping geometries, terminal pinnacles, and earlier drowning and burial by siliciclastics.

Differences in antecedent topography affected margin width and stability, resulting in changes from broad aggrading to prograding margins vs. high-relief and collapsed margins. Timing and rates of subsidence largely controlled along-strike variability, timing of drowning, backstepping geometries, and pinnacle development. Timing of siliciclastic basin fill dictated differences in platform-margin geometries such as slope angle, relief above basin floor, and progradation at basin margins. Development of ramp profiles with oolite margins in the Early Triassic and subsequent development of steep-sided margins in the Middle Triassic reflects changes in carbonate factory type following the end-Permian extinction.

Process-based depositional models derived from the NPJB can aid in the prediction of facies distribution and architectural styles at the basin scale in other systems, particularly in areas of active tectonism and temporal variations in oceanographic conditions, such as, for example, in the prolific Tertiary carbonates reservoir province of southeast Asia.

KEY WORDS: platform margin and slope architecture, south China, comparative analysis, Nanpanjiang Basin, Triassic carbonates

Minzoni M, Lehrmann DJ, Payne J, Enos P, Yu M, Wei J, Kelley B, Li X, Schaal E, Meyer K, Montgomery P, Goers A, Wood T. 2013. Triassic tank: Platform margin and slope architecture in space and time, Nanpanjiang Basin, south China. In Verwer K, Playton TE, Harris PM (Editors). Deposits, Architecture, and Controls of Carbonate Margin, Slope, and Basinal Settings, Special Publication 105: SEPM (Society for Sedimentary Geology), Tulsa, OK. doi: 10.2110/sepmsp.105.10.